In this quick guide, you will guided through the steps to configure the Digitaize Module for the first time.
How the Sensor Link works with the Module:
Secure Locking: The Sensor Link features a dual-lock system for secure attachment to the module.
1. Turn the module on : Press shortly on the front button. Green
2. Connect the module: Lock the module’s lid onto the Sensor Link front side and release.
3. Lock the module: Press on the front part of the module to lock the unit in.
Setup with Computer:
4. Connect the USB Receiver to the computer
5. Launch Digitaize Connect and follow the on-screen setup instructions to authenticate your device and register your product:
In case you need help with the software installation process, then click here
6. Automatic connection check:
Once your connected to Digitaize Connect (next step) and register your product, the Module will give you a feedback on the connection status between the Sensor Link ant the Unit:
Yellow pulsating light means the connection between the Unit and the Sensor link is not stable. In this case press gently on top of the front part of the unit to secure the lock (see point 3. above).
We highly recommend to register your product, in order to get full support on your product. To do so, head over to the profile icon in the top right corner of the software and click on “Register product”.
Charging the module:
To charge, detach the module from the instrument and use the provided USB-C cable.
