Home Forums The sensors connector is consumed

Viewing 1 post (of 1 total)
  • Author
  • #8071
    N Coleman

    Plugging the sensor in and out often, can consume the sensors connector. This doesn’t result immediately in failure of the sensor, but in a decreasing accuracy of data.

    To avoid the consumption:

    apply some lubricant or protective oil (such as WD-40 or similar water-displacing sprays) on the connector flap
    Don´t unplug the unit so often.
    Once the sensor is consumed, it needs to be changed

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.