Try to simplify the MIDI stream from Digitaize Connect
Make sure the Digitaize USB Hub is in the recommended proximity of the Digitaize Instrument (about 3-4 meters direct air)
deactivate the MIDI channels sends for individual strings
Choose Mono MIDI mode
Deactivate all MIDI CCs
Set the instrument in TAP mode, before trying out the Bow mode.
Bow mode needs to be fine-tuned with the reactivity settings of the envelope shaper. Try adjust this value
The sensor of Digitaize is placed on the fingerboard. In order to trigger a value, the finger needs to press on the sensor. Try to change the finger pressure slightly or make sure to really establish contact with the fingerboard (not just with the string)
This topic was modified 7 months ago by N Coleman.